Sunbird Energy Ltd.
HOME - Solar Thermal - Solar thermal kit

Solar thermal kit

Water tank

Description :
1. Footballer of solar hot water efficient and easy installation. That is essential for solar water heater.
2. The hot water tank straightened keeps the water temperature at different degrees. It can heat the water instantly at the top. The mixture of hot water and cold water can be avoided by the special design of its structure.
3. The storage tank of hot water is installed in the building. This reduces the heat loss of hot water. 
4. Thanks to his connection with an electric water heater, hot water can also be used during periods without sunlight.
5. Capacity: 100L, 200L, 300L, 400L and 500L (only the solar water heater 300L can be fitted with double heat exchanger).
6. Internal tank: stainless steel construction SUS 316 1.2mm thick or construction porcelain.
Outer tank: painted steel 0.5mm thick stainless steel or 0.5mm thick.
Insulation: polyurethane 45mm.
7. Our hot water tank is suitable for almost all applications of solar water heaters and solar heating.

Reference of products

Capacity of the balloon (L)

Tank (mm)

Height (mm)

Gross Weight (kg)

NSZ (100L) without coil

100L

450

1105

46

NSZ (100L) Single coil

100L

450

1105

46

NSZ (200L) without coil

200L

520

1530

68

NSZ (200L) Single coil

200L

520

1530

68

NSZ (200L) Double coil

200L

520

1530

68

NSZ (300L) without coil

300L

620

1530

95

NSZ (300L) single coil

300L

620

1530

95

NSZ (300L) Double coil

300L

620

1530

95

NSZ (400L) without coil

400L

710

1580

112

NSZ (400L) single coil

400L

710

1580

112

NSZ (400L) Double coil

400L

710

1580

112

NSZ (500L) without coil

500L

710

1715

122

NSZ (500L) single coil

500L

710

1715

122

NSZ (500L) Double coil

500L

710

1715

122

Expansion tank

Description :
As an important part of solar water heater, the expansion tank to absorb changes in volume of water from a heating circuit with temperature. It can absorb the increased fluid pressure in the heating system to prevent its deterioration while holding tight.This is different from a safety valve that relieves the facility, leaving the supercharged fluid escape.

Features:
1. Capacity: 18L
2. Pressure max. : 1.0 MPa
3. Max. -10 ° C-99 ° C
4. preload factory: 0.2Mpa
5. Fitting: 3/4in

Control Panel

1. Equipped with three temperature sensors (one on the sensors, one in the balloon and another one in reserve).
2. Size: 120mm x 120mm
3. Consumption: less than 5W
4. Temperature accuracy: + / - 2 ° C
5. Setting the temperature: 0-99 ° C
6. Maximum power of the circulation pump: 800 Watts Maximum power of the electrical resistance: 3000 Watts.
7. Protection of programming and frost protection (when T is less than 5, the pump is warming up and the liquid in the primary circuit is heated by the balloon warms the solar collector to prevent breakage).

Features Novalic 2:


1. Equipped with three temperature sensors (one on the sensors, one in the balloon and another one in reserve).
2. Consumption: less than 5W
3. Temperature accuracy: + / - 2 ° C
4. Setting the temperature: 0-99 ° C
5. Differential regulator to drive an electric heater (3000 watts max) + 3 or 4 solenoid pumps.

Solar station

Description :
The large box for connecting the pumping station is designed for all hydraulic functions and thermal protection. The function modules and corresponding security are grouped in this unit.


Characteristics of the solar station NSH model 1:


External dimensions: 395x170x145mm
Packaging dimensions: 200mm 460x230x ⅹ
Full power of the circulation pump: AC 110V/220V, 93W
Thermometer and pressure gauge: 1.0MPa, 120 ° C
Pressure release valve: 0.8MPa
Flowmeter: 2-8 L / min
Fitting: 1/2in

Station components for solar water heater:
1. Thermometer and pressure gauge
2. Filling valve with flowmeter
3. WILO Pump: RS-15 / 6
4. Safety Valve


Characteristics of the solar station NSH Model 2:


External dimensions: 450x310x150mm
Packaging dimensions: 580x340x240mm
Power: 110V/220V
Power consumption max. : ≤ 3W
Measuring range temperature: 0 ~ 150 ° C
Pump power: <600W
Power of electric heater: ≤ 3000W
System pressure: 0.8MPa
Vent valve pressure: 0.8MPa
Number of inputs: 3
Number of output signals: 3
Fitting: 1/2in

Components of the solar station:
1. Safety Valve
2. WILO Pump
3. Manometer
4. Flow Sensor
5. Controller